![]() ![]() There should be a small gap between all the pieces of stained glass to accommodate the copper foil and solder. Finish cutting the pieces and place them on the pattern together.Note the corners of the jig and how they butt up against each other – this is what you need to do for squaring stained glass panel. Use a jig set up like the one below to hold your glass pieces in place.Double check everything with a T square before you bang the jig in place.You can either use Morton Layout System pinned into a homasote board or just bang 2 X 1″ batons of wood at right angles into chipboard or plywood, using the edges of your pattern as a guide. Use a jig to keep your stained glass square.If you don’t use a jig, pieces will move around and will not remain square Squaring Stained Glass With a Jig You can see if it looks right for you by clicking here Stained Glass Made Perfect. The course can be done in your own time as it’s online. If you don’t have a physical course near you my Stained Glass Made Perfect class has helped many students improve their cutting. If you can’t seem to get your pieces cut accurately there are a many techniques you can learn to improve it. You won’t achieve any squaring of right angles if you haven’t done both 1 and 2. ![]() This may sound obvious but you’d be surprised how many people don’t check this! First off, make sure your pattern right angles are absolutely accurate before you start cutting.Make sure your pattern is 100% accurate Getting The Basics Right It’s worth knowing that the process of squaring stained glass lead came panels is a tiny bit different. This tutorial is for those who struggle with making sure a copper foiled panel is perfectly square – or rectangular. Squaring stained glass is a combination of accurate cutting and constant checking. Squaring Stained Glass – Making Your Panel Fit ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |